You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Allochroic Particles

Do colour-change particles work in a dry powder format?

With difficulty, and usually not for the reason people expect.

The shift needs a change in the particle's local environment, and a dry powder does not provide one — there is no water to trigger it during application. A colour-change particle in an anhydrous pressed powder typically does nothing, or shifts only where it meets moisture on skin, which reads as patchy rather than as an effect.

Where it does work is a powder with an aqueous phase: a cream-to-powder, or a pressed powder made by wet granulation where a small amount of water is present in the binder. Even then the effect is weaker than in an emulsion.

If the concept has to be a dry format, decide first whether the shift must happen on application or whether a conventional pigment delivers the same story with far less risk.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor