Can allochroic particles be used in a colour-changing lipstick?
Yes — this is a typical application for the effect, but two engineering points have to be solved first.
Base compatibility. A lipstick is a pure oil and wax system, so it needs the oil-based 360 series; a 460 or 160 grade will be swollen by the oil load and lose the effect on storage.
Incorporation. A lipstick is made by melting the wax base, so the particles normally go in at the end, after the wax has cooled, with the shear kept low enough not to rupture the shell and enough agitation to stop them settling into an uneven distribution.
Start with a sample: run the particles through your actual temperature profile, then check the colour change and the evenness of colour after cooling, and follow with a stability test before scaling up.