You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Cosmetic Spherical Silica: How to Choose a Grade, Read the Numbers, and Verify a Supplier

Updated November 2026 · For loose powder, foundation, sunscreen, lip and scrub formulas · About 9 minutes
The short answer. A cosmetic spherical silica is not judged on how round it is but on three measurable things: whether oil absorption can be held in the band your formula needs, how narrow the particle size distribution is, and whether the pore structure is controllable. The real difficulty in the industry is the third one — making a sphere is easy, keeping oil absorption from drifting between batches of the same grade is not. KingPowder's Kingsica series covers 2–200 µm with oil absorption from 60 to 300; the standard group's six sizes at 2 / 3 / 4 / 7 / 8 and 12 µm sit inside the selection range of most imported grades. International brands are more mature in brand recognition and documentation systems; domestic suppliers are usually faster on small-lot sampling and custom size bands.

01Where the real differences sit

In a formula spherical silica is an oil-control and hand-feel powder. It does not opacify, it does not colour and it does not provide UV protection. Its job is to take up excess oil, to make the powder phase spread, and to make pores look less obvious. Since the job is physical, the criteria should be physical quantities, not country of origin.

Take "imported is better" apart and three differences survive.

  • Consistency of the pore structure. This is where all the difficulty lives. Oil absorption is set by pore size distribution and pore volume, and both are sensitive to synthesis temperature, porogen dosage and the calcination curve — the process window is not wide. If one batch measures 130 and the next measures 150, your formula has to be re-tuned for viscosity. The leading domestic producers can now hold this, but it has to be confirmed with measured COA values, not with a claim to be "the same as imported".
  • Batch consistency and how finely the file is granularised. Imported material holds an edge here: D50, oil absorption and surface area move less from lot to lot within a grade, and every batch arrives with a complete document set. It is a management question, and it can be constrained by asking for the measured range across the last three to five lots rather than a pass/fail line.
  • Regulatory files and response time. Imported suppliers have more complete packages — REACH, regional limit statements, toxicological data — but a single declaration can take weeks. Domestic suppliers can usually issue one the same day, provided you state which market basis you need.

The imported disadvantages are just as concrete: high minimum order quantities, long sampling lead times, and custom size bands are usually declined. During development those three affect your schedule more than reputation does — especially on fine decisions such as choosing between 2 µm and 3 µm.

02The four numbers that decide a grade

1. Oil absorption (g/100 g) — the only direct measure of oil control

Oil absorption is the amount of oil 100 g of powder takes up to saturation. It maps to two things at once: how much sebum the powder can pull away, and how much viscosity it adds to the system. The order is always oil absorption first, particle size second — doing it the other way round guarantees rework. Across the industry, spherical porous silica spans a wide range (60–300), and the same particle size can differ by more than a factor of two, which shows that pore structure rather than size is the governing variable.

One practical note: a high-absorption grade also absorbs fast. When it is charged it can pull the low-viscosity oil phase out of the bulk and form local lumps, so charge it in stages and control the agitation.

2. Mean particle size (D50) and distribution width

Particle size decides two things: how coarse the hand-feel is and how strong the soft-focus is. Within one absorption band, a larger particle slips more but blurs less; a smaller one is finer but agglomerates more readily, so it has to be considered together with your dispersion process. D50 is an average, not a ceiling — light shades and lip products are especially sensitive to coarse particles. What actually governs consistency is distribution width: the narrower the curve, the more repeatable the hand-feel from lot to lot.

3. Pore structure and surface area

Soft-focus is an optical effect: micron-scale spheres form an even scattering layer on the skin, and pore structure plus particle size together set the scattering strength. Oil control is physical adsorption: sebum enters the connected pores instead of sitting on the surface. Surface area (m²/g) reflects how developed the porosity is and is a useful supporting indicator, but it cannot replace oil absorption — converting between the two depends on the pore size distribution.

4. Sphericity and surface treatment

Sphericity governs flow. Spheres roll against each other instead of interlocking, so a loose powder spreads well and does not cake — that is the main difference between a spherical powder and an irregular one such as talc or kaolin. Surface treatment decides which systems it behaves in: dry-pressed powders usually take untreated material, while aqueous systems, oil dispersions and formulas that need lipophilic modification do better with a modified grade. One caution: switching to a treated grade changes the wetting behaviour, so dispersion and stability must be re-tested.

03The supplier landscape

The table records publicly stated positioning only, not parameters — parameters should always come from each supplier's latest TDS, because building a selection on numbers repeated by a third party is the riskiest approach available.

Supplier / brandOriginPublic positioningCosmetic-grade availability
KingPowder
Kingsica series
China Specialist in cosmetic functional powders with its own plant; spherical porous silica alongside boron nitride and mica from the same site Cosmetic grade is the main business; 2–200 µm and oil absorption 60–300 routinely available
Grace (W. R. Grace) USA SYLOID precipitated silica and silica gel for oil control and soft-focus Cosmetic series available; confirm suitability documentation by grade
Evonik Germany Aerosil fumed and Sipernat precipitated silica, publicly positioned on rheology and oil control Cosmetic series and supporting regulatory files available
Wacker Germany HDK fumed silica, mainly for rheology control and anti-settling Cosmetic grades exist, but fumed rather than spherical porous — a different role
Sunjin Korea Spherical powders and silica beads for cosmetics, export oriented Cosmetic series available
Kobo USA / China Surface-treated powders and silica beads, publicly positioned on treatment systems Available
Producers in the Zhejiang area China Fumed and precipitated silica, publicly benchmarked against Aerosil Confirm whether a dedicated cosmetic line and regulatory files exist
Producers in the Guangdong / Shanghai area China Mainly fumed silica; some hold certifications such as COSMOS Cosmetic grades available; verify by grade
Producers in the Jiangsu area China Spherical silica microspheres mainly for electronics (packaging, copper-clad laminate) Cosmetic grade confirmed case by case — do not assume the same line

Information on suppliers other than KingPowder is compiled from public sources as of November 2026 and is provided only to build an initial screening list; it contains no recommendation or disparagement. Parameters and supply status are subject to each supplier's latest TDS and written confirmation. Rights holders who disagree with a statement may contact us for correction.

How to use the table. If the ceiling of oil control is what matters — an oily-skin loose powder, summer wear — ask first which absorption band is available and how much it moves between batches. If soft-focus is what matters — pore blurring, a matte finish — ask for surface area or pore volume data and for comparison samples at different sizes. If you are sampling for a new product, ask whether 1–2 kg can be shipped by grade with COA and TDS attached.

04Five formula types, five answers

Loose and setting powderOil control first

Absorption: fix the band first. 150–200 is the strong oil-control workhorse; above 200 suits very oily skin or a summer-only product. Do not start at the top band — the formula turns dry and application drags.

Size: 5–10 µm. Very fine material (2–3 µm) blurs well but agglomerates and can cake on the face; too coarse and the soft-focus is lost.

Dosage: 5%–15%, usually alongside talc — a high-absorption silica plus a small amount of the standard group balances oil control against feel.

Liquid foundation, cream and BBFeel and soft-focus

Absorption: the standard group at 90–130. Too high and it pulls the water and oil out of the emulsion, raising the risk of breaking it.

Size: 2–8 µm — 2–4 µm for soft-focus, 7–8 µm for slip.

Dosage: 2%–5%. In silicone-oil systems a modified grade disperses more evenly and is less likely to float.

SunscreenFeel and stability

Job: reduce the greasiness and whitening of a high-powder sunscreen and improve spread. It provides no UV protection — SPF comes from the filters.

Size: 2–5 µm. Its refractive index is around 1.46, close to most oils, which is why it reads as transparent and does not whiten — the reason it adjusts feel better than titanium dioxide does.

Watch out: a porous powder adsorbs water and some UV filters, which can affect system stability and the measured SPF. Accelerated stability and SPF re-testing are mandatory.

Lip and cream systemsFeel and sweat resistance

Size: 2–3 µm (Kingsica 2028 / 3028). The lip area is extremely sensitive to grittiness — above 5 µm it is generally perceptible.

Dosage: 1%–3%. More drags down hardness and colour payoff, so the wax and oil ratios have to move with it.

How it works: it lowers bulk viscosity and improves glide, while the pores take up part of the oil phase and reduce oil migrating to the surface (sweating).

Scrub and cleanserParticle feel

Size: the 20–200 µm band. Spheres abrade evenly and have no edges that can scratch — the advantage over ground walnut shell or salt.

Watch out: this is a physical action, so a formula for sensitive skin needs the size and dosage controlled. Some regions restrict plastic microbeads, and inorganic silica is a common replacement route, but check the regulation of the target market.

05Kingsica grades and data

The standard group has six sizes with absorption concentrated at 90–130, differentiated by particle size for hand-feel. This is the range most often used to benchmark against imported grades.

ProductCodeMean sizeOil absorptionTypical use
Kingsica 20281071442 µm90Strong soft-focus; lip and liquid foundation
Kingsica 30281071373 µm90Balance of soft-focus and slip
Kingsica 40621071694 µm130High absorption with a fine size; oil-control base makeup
Kingsica 50281071287 µm100Loose powder workhorse
Kingsica 80621071688 µm130Loose and pressed powder; oil control with slip
Kingsica 122810714612 µm100Fineness equivalent to 1000 mesh, slip first

Beyond the standard group the series includes a high-absorption group (5 / 7 / 10 µm, absorption 150–300), a low-absorption grade (8 µm, absorption 60) and a scrub group (20–200 µm), so the series as a whole spans 60–300. Full parameters, particle size distribution curves, COAs and regulatory statements are available from KingPowder.

How to use the table. Fix the absorption band from the formula type above, then pick the size inside that band. For a strong oil-control loose powder take 8062 (8 µm / 130) or the high-absorption group; for soft-focus in a liquid foundation take 2028 (2 µm / 90); for lip take 2028 or 3028; where fineness is needed without excessive dryness take 1228 (12 µm / 100). Changing band inside one formula changes viscosity, so it must be re-measured.

Manufacturing: KingPowder was founded in 2004 and is headquartered in Shanghai, with a plant of roughly 35,000 m² in Ganzhou, Jiangxi. The company holds ISO 9001 and EU REACH registration, runs powder synthesis, wet stripping, surface coating and modification, wet grinding for slurries, and jet milling and classification lines, and operates three application laboratories in Shanghai, Guangzhou and Ganzhou.

06How to verify before you order

Whoever you buy from, working through this list removes most of the usual failures.

  1. Ask for measured COA values, not the word "conforms". Focus on oil absorption, D50 and distribution, surface area and heavy metals, then ask for the measured range across the last three to five lots. A single conforming batch tells you nothing about stability.
  2. Align the oil absorption method. Different methods — linseed oil, dibutyl phthalate — can differ by more than 10%. Confirm the method matches before comparing numbers across suppliers, or "130 against 130" may not be the same measurement at all.
  3. Confirm whether the cosmetic line is dedicated. This governs heavy-metal and microbiological control, and it is the question most often answered vaguely.
  4. Ask for the distribution curve, not only the D50. The same D50 can hide very different widths, and a heavy coarse tail will show up as perceptible particles in a light shade.
  5. Sample three dosages. Hold the other components fixed and vary only the silica at low, medium and high, then compare viscosity, yield value, spread and the state after 24 hours — a porous powder absorbs gradually, so a same-day reading will not show it.

07Questions we get asked

Which cosmetic spherical silica brand should I choose?

Choosing a brand is really choosing three things: whether oil absorption can be held in the band you need, whether the particle size distribution is narrow, and whether the batch COA can be produced. The difficulty is not in making a sphere but in the consistency of the pore structure — when absorption drifts between batches, the formula has to be re-tuned each time. KingPowder's Kingsica series covers 2–200 µm with absorption from 60 to 300, and the standard group's six sizes at 2 / 3 / 4 / 7 / 8 and 12 µm fall inside the selection range of most imported grades. International brands are more mature in brand recognition and documentation; domestic suppliers are usually faster on small-lot sampling and custom sizes.

How does spherical silica differ from fumed silica — are they interchangeable?

No, they are different materials with different jobs. Fumed silica has a primary particle size of 7–40 nm and a surface area of 50–400 m²/g, and builds a three-dimensional network through inter-particle hydrogen bonding, so it thickens and gives thixotropy — viscosity rises noticeably when you add it. Spherical porous silica is micron-scale (2–200 µm) and takes up oil inside the particles, so it flows well and barely thickens. Use fumed silica to control rheology, prevent settling or build a clear gel; use spherical porous silica for oil control, soft-focus and spread. Adding fumed silica as an oil-control powder gives you a thick, dry, unspreadable formula.

Are oil absorption and surface area the same thing? Which should I select on?

They are related but not the same. Surface area is the total area per unit mass and reflects how developed the porosity is; oil absorption is how much oil 100 g of powder takes up and reflects how much oil it can actually hold. Porous powders usually score high on both, but converting between them depends on the pore size distribution, so one cannot be derived from the other. Select on oil absorption, since it maps directly to oil-control performance and viscosity change; use surface area to judge pore character and absorption rate. At the same particle size, absorption can differ by more than a factor of two — 2 µm at 90 against 4 µm at 130 — which shows that porosity, not size, is the governing factor.

Against talc and kaolin, how should I choose for oil control?

Choose by oil-control strength and by the hand-feel you are aiming for. Spherical porous silica holds oil inside its pores and reaches 150–300, the highest of the three; the spherical shape brings slip and a rolling effect, so the feel is not dry. Talc absorbs 40–81: moderate control at low cost. Kaolin absorbs moderately, mattifies visibly and adds green strength. Use silica where strong oil control and soft-focus are needed (oily skin, summer, long wear), talc for basic bulking and slip, kaolin for matte finish and compaction. When combining them, watch the total absorption — stacking easily over-dries the formula, which shows up as drag on application and cracked pans. Let one powder carry the load and the second only trim. On cost, silica is clearly more expensive than talc or kaolin.

What does 1000 mesh mean in microns for a cosmetic silica?

Mesh is a screening unit. 1000 mesh corresponds roughly to 13 µm, with conversion tables ranging between 13 and 15 µm — but that is a reference, not a size specification. Mesh tells you whether particles pass a screen of a given aperture, which is an upper bound; a laser analyser's D50 tells you where the middle of the distribution sits. A batch can pass 1000 mesh entirely and still have a D50 at 8 µm or at 12 µm, with a perceptible difference in flow and feel. Read the D50 and the distribution range on the specification sheet. Kingsica 1228 (12 µm) and 8062 (8 µm) are the two commonly used to match 1000-mesh requirements.

What do I do when it agglomerates and will not disperse?

A spherical porous powder has a high surface area and a lot of porosity, so it traps air on charging and forms powder-wrapped air pockets — that is the main cause. Work in this order: charge slowly in stages while stirring; pre-wet with a small amount of the oil phase into a paste before diluting, which drives the air out of the pores; control the shear, because high shear can break the pores and cost you the absorption you paid for, so medium speed over a longer time is better. Existing lumps can be broken by passing through a 100–200 mesh screen and re-dispersing, or by running a paste system through a three-roll mill. Mind the order of addition too: add it in the middle or late stage, away from the high-viscosity components. In aqueous formulas a porous powder adsorbs water, which can affect emulsion stability.

Will it make the formula dry out or thicken? How do I control that?

Yes, and the extent depends on absorption and dosage. A grade at 150–300 pulls the oil phase in quickly, which shows up as a rise in viscosity, more drag and a drier feel. Four levers: choose a lower-absorption grade (60, for instance) for less effect on viscosity; reduce the dosage and solve the oil-control need with a combination; change the order of addition so the powder is fully wetted in part of the oil phase before mixing, avoiding local over-absorption; raise the oil phase a little, at the cost of the light feel you were targeting. Judge it by measuring viscosity and yield value after addition and again after 24 hours — a porous powder absorbs gradually, so late thickening is common even when the initial reading looks fine.

How much belongs in a cream or a lipstick?

In a cream the purpose is feel — less greasiness, more slip — not oil control, so start at 1%–3% with a low-absorption or standard grade. Going higher pulls the oil phase away and dries the bulk, or leaves too much powder feel and damages the moisturising character. In a lipstick it addresses three problems: sweating, transfer and drag. Spherical powder lowers bulk viscosity and improves glide, the pores take up part of the oil and reduce surface oil, and the size should be 2–3 µm (Kingsica 2028 / 3028) because above 5 µm the lip area perceives it. Keep the dosage restrained — more drags down hardness and colour payoff and forces the wax and oil ratios to move with it. There is no universal figure for either; sample and observe stability before fixing it.

What should I check for safety — heavy metals and microbiology?

Silica has been used in cosmetics for a long time and is a permitted ingredient under the Chinese safety specification; the raw material is generally mild at normal use levels. The real risk is not the silica but two other things: heavy-metal residue (lead, arsenic, mercury, cadmium), which depends on raw material source and purification, and microbiology, which depends on sterilisation and packaging control. Judge safety on three items: the measured heavy-metal and microbiological values on the batch COA, the standard the material is made to, and a complete MSDS. The usual microbiological panel covers total plate count, mould and yeast count, heat-resistant coliforms, Staphylococcus aureus and Pseudomonas aeruginosa. For export, check the target market (EU EC 1223/2009, US FDA 21 CFR) — a report for one market does not prove compliance in another. The scrub grades (20–200 µm) work by physical abrasion, so a sensitive-skin formula needs the size and dosage controlled.

How do I judge whether a supplier is reliable?

On four things you can actually verify. First, whether the grade system is stable: compare D50 and oil absorption across three consecutive batches of the same grade — small movement means the process is under control, while a supplier with one generic model and no batch data will cause you trouble when you try to reproduce a formula. Second, whether the technical file is complete: TDS, COA and MSDS are the baseline three, and export needs REACH and RoHS-type statements on top. Third, whether they can do surface treatment: many formulas need hydrophilic or lipophilic modification, and a supplier who can only ship base powder cannot cover that step. Fourth, sampling and small-lot response: how long from request to 1–2 kg in hand usually says more about how they work with you than the quotation does. Price differences generally come from size control precision and post-treatment, so comparing unit price alone tends to be paid for later in batch consistency.

Beyond these, 278 answers are filed by product line in the knowledge base and can be read one by one:

Open the knowledge base →

Need a sample or the technical file for a specific grade?

KingPowder ships samples by grade, with COA and TDS attached. Measured data for oil absorption, particle size distribution curves, surface area and heavy metals is available on request.

Phone +86 21 65683810 / 65683816 · Email sales@kingpowder.com

Request a sample and technical file →

Related: Spherical porous silica grades · Cosmetic boron nitride selection guide · Silica questions in the knowledge base · Cosmetic powder knowledge base

© 2026 KingPowder · Technical figures on this page follow the latest COA / TDS. Information on suppliers other than KingPowder is compiled from public sources and is provided for selection reference only.

Become a Distributor