You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Inorganic Sunscreen

Nano TiO2 Pre-dispersion

Product NameProduct Code

Primary

Particle Size

Dispersion Medium

Powder

Content

NanoT 401510308015nmC12-15 Alkyl Benzoate40%
NanoT 235510307730nmDimethicone55%
NanoT 451310300150nmC12-15 Alkyl Benzoate50%
NanoT 452810301450nmDicaprylyl Carbonate50%
NanoT 503010300230nmWater, Glycerin50%
NanoT 456010309030nmC12-15 Alkyl Benzoate65%

Inorganic UV filter powders with a mild profile and high SPF performance for sunscreen, primer and children's sun care products.

Need a sample or technical data for Nano TiO2 Pre-dispersion?

Request sample

Inorganic Sunscreen — frequently asked questions

The 13 questions formulators and buyers ask most — open a card for the full answer and our reasoning.See all “Inorganic Sunscreen” answers (13) →

Recommended 01 / 13

Powder or pre-dispersion?

Pre-dispersion if you can — it solves the hardest problem in the formula, which is wetting a nano powder completely.

Read the full answer
Recommended 02 / 13

Your grades run from 15 nm to 160 nm. What does size change?

Smaller particles give more transparency and better SPF per unit mass;

Read the full answer
Recommended 03 / 13

How do I choose the carrier for a pre-dispersion?

Match it to your emollient system and to the feel you want — the carrier becomes part of the formula.

Read the full answer
04 / 13

Nano TiO2 or nano ZnO — which should I use?

ZnO for UVA coverage and TiO2 for UVB and the higher refractive efficiency;

Read the full answer
05 / 13

Nano or non-nano? What is the regulatory difference?

It is the single most consequential decision in an inorganic sunscreen, because nano status changes …

Read the full answer
06 / 13

How much do I need to reach a given SPF?

As a rough starting point, 5–10% combined inorganic solids gets you into the moderate-SPF range, and…

Read the full answer
07 / 13

Does the coating matter for photostability?

Yes — it is the main lever you have over the photocatalytic activity of the particle.

Read the full answer
08 / 13

How do I reduce the white cast?

Smaller particle size, better dispersion, and if necessary a lower loading with an organic filter ca…

Read the full answer
09 / 13

What testing documents do you provide?

We provide the material documentation: COA, TDS, SDS, and the nano-specific statements a market may require.

Read the full answer
10 / 13

What are the MOQ and lead time for sunscreen grades?

MOQ is 1 kg for a powder sample and 5 kg for a pre-dispersion sample;

Read the full answer
11 / 13

Why does my mineral sunscreen pill or roll up?

Pilling is a film problem, not a pigment problem, and it usually has one of three causes.

Read the full answer
12 / 13

Can a mineral sunscreen be made as a spray?

Yes, but only as a pump spray, and the formulation window is narrow.

Read the full answer
13 / 13

Can bismuth oxychloride be used as a UV filter?

No. In cosmetic formulas bismuth oxychloride (CI 77163, Kingbismo® range) works as a pearlescent and…

Read the full answer

Not the question you had? Talk to our technical team, or browse the knowledge base.

Related questions

These come from other powder families that often appear alongside this product in the same formula.

  • How do I reduce white cast and pilling in mineral sunscreen?

    White cast comes first from refractive index contrast and particle size, and only second from the formula. Nano TiO2 and ZnO in the 30-50 nm range scatter far less visible light; above roughly 100 nm, white cast is unavoidable.

    Three practical routes: use surface-treated nano grades, since agglomerates rather than primary particles cause most of the whitening; switch to a pre-dispersed slurry to bypass the dispersion step and get a tighter size distribution; and add a small amount of spherical silica to improve spreading so the film stays thin and even.

    Pilling usually appears alongside white cast because both point to poor dispersion. If pilling persists after switching powders, check for high levels of carbomer or xanthan gum, which ball up easily during rub-in at high solids loading.

  • Which powders give a natural soft-focus effect?

    Soft focus means scattering light at the skin surface instead of reflecting it directly. At the powder level that requires two things: a particle size distribution close to the wavelength scale, and shapes that create many small diffuse reflecting facets.

    The most reliable combination is spherical porous silica with hexagonal boron nitride. The silica provides diffuse scattering through its pore structure and absorbs excess sebum, cutting the specular shine that makes texture obvious; boron nitride platelets sit in skin creases and provide a satin rather than flat-matte finish.

    Typical use levels are 2-5% spherical silica and 3-8% boron nitride.

Become a Distributor