| Product Name | Product Code | Primary Particle Size | Dispersion Medium | Powder Content |
| NanoT Z-6060 | 103079 | 50nm | C12-15 Alkyl Benzoate | 60% |
| NanoT Z-6050 | 103078 | 50nm | Dimethicone | 50% |
Inorganic UV filter powders with a mild profile and high SPF performance for sunscreen, primer and children's sun care products.
Need a sample or technical data for Nano ZnO Pre-dispersion?
The 13 questions formulators and buyers ask most — open a card for the full answer and our reasoning.See all “Inorganic Sunscreen” answers (13) →
ZnO for UVA coverage and TiO2 for UVB and the higher refractive efficiency;
Read the full answerPre-dispersion if you can — it solves the hardest problem in the formula, which is wetting a nano powder completely.
Read the full answerMatch it to your emollient system and to the feel you want — the carrier becomes part of the formula.
Read the full answerIt is the single most consequential decision in an inorganic sunscreen, because nano status changes …
Read the full answerSmaller particles give more transparency and better SPF per unit mass;
Read the full answerAs a rough starting point, 5–10% combined inorganic solids gets you into the moderate-SPF range, and…
Read the full answerYes — it is the main lever you have over the photocatalytic activity of the particle.
Read the full answerSmaller particle size, better dispersion, and if necessary a lower loading with an organic filter ca…
Read the full answerWe provide the material documentation: COA, TDS, SDS, and the nano-specific statements a market may require.
Read the full answerMOQ is 1 kg for a powder sample and 5 kg for a pre-dispersion sample;
Read the full answerPilling is a film problem, not a pigment problem, and it usually has one of three causes.
Read the full answerYes, but only as a pump spray, and the formulation window is narrow.
Read the full answerNo. In cosmetic formulas bismuth oxychloride (CI 77163, Kingbismo® range) works as a pearlescent and…
Read the full answerNot the question you had? Talk to our technical team, or browse the knowledge base.
Related questions
These come from other powder families that often appear alongside this product in the same formula.
White cast comes first from refractive index contrast and particle size, and only second from the formula. Nano TiO2 and ZnO in the 30-50 nm range scatter far less visible light; above roughly 100 nm, white cast is unavoidable.
Three practical routes: use surface-treated nano grades, since agglomerates rather than primary particles cause most of the whitening; switch to a pre-dispersed slurry to bypass the dispersion step and get a tighter size distribution; and add a small amount of spherical silica to improve spreading so the film stays thin and even.
Pilling usually appears alongside white cast because both point to poor dispersion. If pilling persists after switching powders, check for high levels of carbomer or xanthan gum, which ball up easily during rub-in at high solids loading.
Soft focus means scattering light at the skin surface instead of reflecting it directly. At the powder level that requires two things: a particle size distribution close to the wavelength scale, and shapes that create many small diffuse reflecting facets.
The most reliable combination is spherical porous silica with hexagonal boron nitride. The silica provides diffuse scattering through its pore structure and absorbs excess sebum, cutting the specular shine that makes texture obvious; boron nitride platelets sit in skin creases and provide a satin rather than flat-matte finish.
Typical use levels are 2-5% spherical silica and 3-8% boron nitride.
We reply within one business day with shipping arrangements and technical documents. Samples are free of charge; freight is collect or credited against your next order.