You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Formulation & Process

The pearl in my eyeshadow looks dull and the colour turns grey. What should I change?

Check particle-size matching first, then the opacity of the base powders, and only then the pearl loading. Done in the other order it usually gets greyer.

Step one: match platelet size to the base particle size. If the pearl platelet is smaller than the base's average particle, the base buries it and the reflective face never shows, which reads as grey. Oversized platelets press-crush or distribute unevenly. A workable rule is a platelet diameter at least three times the base D50 — with a base at 8 um, a 20-40 um pearl is usually stable. Step two: check the high-opacity powders. Titanium dioxide and high-opacity calcined kaolin scatter incoming light, so directional reflection from the pearl drops. In a pearl eyeshadow, TiO2 should do nothing more than adjust hue and mask the base; keep it as low as the shade allows. Step three: raise mica-based pearl and bismuth oxychloride together. Mica-based pearl gives a transparent base and soft light, bismuth oxychloride gives satin sheen; the pair reads more natural than loading either one harder.

One factor that gets overlooked: pressing pressure. Excess pressure flattens or cracks the platelets and drops gloss by a full step. Press the same formula at two pressures and compare — the difference shows immediately.

Blind-evaluate before you sign off. Pearl depends heavily on the light source, so check once in daylight near a window and once under indoor light, not just one.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor