Is there a maximum powder load in long-wear foundation?
Yes, and the ceiling depends on the format. Liquid foundation runs 15-22%, cushion 18-25%, cream foundation up to 25-30%. Go past those bands and the problems are predictable.
Three consequences past the ceiling. First, heaviness and poor spread: with too much powder the oil phase can no longer wet every particle, viscosity climbs, and application drags. Second, dryness and flaking: more powder and less oil leaves the film inflexible, so it cracks along expression lines. Third, stability loss: high-solids systems settle and separate faster, shortening shelf life.
High powder load does not automatically mean a heavy feel. Three routes break the trade-off: use powders with high hiding power (fine-particle TiO2, bimodal distribution) so less does more; widen the particle size distribution to improve packing, which lowers viscosity at the same solids; and replace part of the spherical powder with platelets, which lie flatter and read thinner on skin.
Judge overload by three symptoms rather than a number: grind gauge passes but application feels gritty, flaking appears two hours after application, or separation shows up after seven days standing. Any one of them points to a powder level or system mismatch.
A working reference: every 5% more powder lifts coverage roughly one step (light to medium), but perceived heaviness climbs faster. Users usually describe it as suffocating rather than better covered, so raise hiding power rather than dose.
One format difference worth planning for: a cushion holds the formula in a sponge, so high powder load causes settling that the sponge cannot pick up. The practical ceiling sits 3-5% below liquid foundation, and you should judge stability inside the sponge, not inside the bottle.