You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Formulation & Process

What does powder do for transfer-resistant wear?

Powder helps in three places, and none of them is adhesion.

First, it takes up excess oil. Transfer is oil from the lips moving to the cup wall, so absorbing free oil reduces what can transfer. Spherical porous silica is the most efficient option here — high specific surface area, fast oil uptake — typically at 2-5%. Second, it supports film formation. Some powders (spherical silica, sericite) build microstructure at the lip surface so the film-former spreads more evenly and dries faster; a denser film resists transfer better. Third, it anchors colorant. Colorant dispersed in the oil phase migrates with the oil; colorant held in the powder network stays on the lip, and that is the line between "stays" and "comes off".

Be clear about the cost: long wear and comfort are two sides of one thing. More powder means drier, more visible lip lines, sometimes flaking; more film-former means tightness and a parched feel. The core of a transfer-resistant formula is not how much you add but what structure you build — platy powder for the scaffold, spherical silica for oil uptake, a small amount of film-former to seal. The combination does more than any single increase.

Verify with a transfer test: wait five minutes after application, press standard filter paper at fixed pressure for ten seconds, measure what transfers. Ask the panel about comfort at four hours as well. Read the two numbers together, or you will not know what the wear cost.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor