You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Formulation & Process

How do I reduce white cast and pilling in mineral sunscreen?

White cast comes first from refractive index contrast and particle size, and only second from the formula. Nano TiO2 and ZnO in the 30-50 nm range scatter far less visible light; above roughly 100 nm, white cast is unavoidable.

Three practical routes: use surface-treated nano grades, since agglomerates rather than primary particles cause most of the whitening; switch to a pre-dispersed slurry to bypass the dispersion step and get a tighter size distribution; and add a small amount of spherical silica to improve spreading so the film stays thin and even.

Pilling usually appears alongside white cast because both point to poor dispersion. If pilling persists after switching powders, check for high levels of carbomer or xanthan gum, which ball up easily during rub-in at high solids loading.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor