You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Formulation & Process

High oil-absorption powder makes the finish feel dry. How do I rebalance it?

The problem is not high oil absorption as such — it is that the powder strips oil from both the formula and the skin surface. The fix is to reduce the effective absorbing surface rather than simply cut the loading.

Three levers. First, change grade: within porous silica, oil absorption can differ by more than 2x depending on specific surface area, so stepping down one grade often beats cutting the loading from 5% to 3% — you keep the oil control without the tight feel. Second, surface treatment: a silicone coating forms a hydrophobic film over the pore openings and slows the absorption rate, so oil uptake becomes gradual instead of instant and feels noticeably less drying. Third, rebalance: 1-3% boron nitride or spherical powder restores slip, and an emollient ester such as isononyl isononanoate brings back spreadability so the dryness is not perceived.

The practical test is simple. If skin feels tight 30 minutes after application you have over-absorbed; if it simply is not shiny, you are on target.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor