Which powders should I combine for a matte finish?
Matte needs three things at once: high oil absorption, high diffuse reflection, and no glossy platelets. A single powder rarely delivers all three cleanly.
The workhorse is porous silica, which handles both oil absorption and soft focus at 3-6%. Add a spherical powder (spherical silica or PMMA beads) at 2-4% for ball-bearing slip and pore blurring, then a little calcined kaolin or talc to bulk out and control cost. What you must avoid is mica, bismuth oxychloride and pearlescent pigments — their platelet reflection destroys a matte finish instantly.
Two common failure points. First, too much titanium dioxide: coverage goes up, but its high refractive index gives a chalky white rather than a matte look, so 3-5% is a safer range. Second, the wrong oil: high-gloss oils such as phenyl silicone cancel out the matte effect, so switch to low-refractive-index esters or volatile silicones.
If you need matte but not dry, swapping part of the porous silica for a surface-treated grade is the cheapest fix available.