You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Formulation & Process

How do I choose pore size for oil absorption?

Pore size decides two things: how fast oil goes in and how much the particle can hold. Three bands cover most work.

Small pores at 5-15 nm with 300-500 m2/g surface area exert strong capillary force, so sebum is pulled in as soon as it appears. Capacity is limited and the structure tends to collapse once saturated. Use 2-4% for early-stage control and immediate matte.

Medium pores at 15-30 nm with 150-300 m2/g balance speed against capacity and carry most long-wear formulas at 3-6%.

Large pores above 30 nm with 60-150 m2/g hold more and carry the later hours, but absorb slowly, so used alone they fail to control shine at the start. They belong in a blend as the long-haul reserve.

Distribution matters more than the single figure. A narrow distribution performs well in one phase and drops off in others, while a wide one, for example a continuous 8-40 nm spread, covers a longer wear curve. This is why two suppliers quoting porous silica can behave very differently over eight hours.

Start from where your problem sits. Shine immediately after application points to small pores; shine appearing at four hours points to medium; collapse at eight points to large pores or a higher dose. If every stage fails, total capacity is too low or the formula carries too much oil, and pore size is not the variable.

One effect that is easy to miss: pore size changes skin feel. Small-pore powder absorbs fast but feels dry and slightly rough, while large-pore powder feels smoother. For dry skin, a large-pore grade at a lower dose suits better than a small-pore grade at a high dose.

Pore size and surface treatment also interact, since hydrophobic treatment occupies part of the network, shrinking effective pore size and cutting capacity by 10-30%. Treated grades need a correspondingly higher dose than untreated ones.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor