What does powder need to deliver eight hours of wear?
Powder alone rarely delivers eight hours. Three conditions have to hold at the same time.
First, enough absorption capacity. Start from sebum output: oily skin produces roughly 1-2 mg per square centimetre per hour, so a full face of about 400 square centimetres yields 3-6 g over eight hours. A powder at 250 g/100 g absorption needs 1.5-2.5 g of particles taking part. That is not a large dose, but those particles must sit in the film and be reachable by sebum; powder fully enclosed in film former contributes nothing.
Second, the structure must not collapse. Once loaded, powder that softens and sinks lets the finish settle into skin texture, which reads as dullness and patchiness. Platelet powder provides the scaffold, since platelets support each other so the overall structure survives as oil fills the gaps. Platelets at 30-40% of total powder is the usual band.
Third, film support. A powder layer on its own is removed by friction and sweat, so a film former such as an acrylate or a silicone resin holds it in place. Dose 1-3%; more feels suffocating and pills.
A working ratio: large-pore porous silica 4-6%, platelet powder 30-40%, film former 1.5-3%, with hydrophobic treatment throughout. This holds six to eight hours, and beyond that touch-ups are needed.
Be precise about the claim. Eight hours on oily skin means the makeup is still acceptable, not that it looks freshly applied. Aligning the claim with what the product does removes a large share of complaints.
Temperature and humidity move the result more than the formula does. At 35 C and 80% humidity, any formula loses two to three hours of wear. Wear tests should record the conditions, otherwise the numbers are not comparable.