You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Formulation & Process

My liquid foundation separates and settles over time. How do I fix it from the powder side?

Settling comes from the density gap between the powder and the liquid phase, combined with poor wetting of the powder surface. Thickeners only delay it.

There are three powder-side levers. First, particle size: coarser powders settle faster, so keeping the main body at D50 5-10 μm with a controlled fines fraction for suspension support works better than adding more thickener. Second, surface treatment: untreated hydrophilic powder wets poorly in the oil phase, clusters, and drops out as a mass, whereas treatment with triethoxycaprylylsilane or PDMS makes the powder oil-compatible so it disperses evenly and settles far more slowly. Third, oil absorption: highly porous powders gain weight as they absorb oil, which actually accelerates settling, so keep the oil-control grade and the suspension grade separate rather than expecting one powder to do both.

Process matters too. Disperse the powder fully into the oil phase before emulsification, not after — anything added post-emulsification will settle. Once a product has already separated you can raise the yield value to rescue it, but that is a patch, not a formula design.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor