Which powder should I use for oil control, silica or talc?
Go with porous silica. Talc is better at slip and as a filler — the two are not in the same league for sebum absorption.
Porous silica traps sebum inside its interconnected pore network and typically absorbs three to six times more oil than talc by weight, so 2-5% loading already delivers a clear matte effect. Talc works mainly through surface adsorption on its platelets and needs a much higher loading to do the same job, and once loaded it tends to cake and make the finish feel heavy. Where talc still wins is slip and cost, which is why it remains the workhorse filler in mid-priced pressed powders.
Most formulas in practice use both: porous silica for oil control and soft focus, talc or mica for spreadability and bulking, plus a little boron nitride for slip. If long-wear oil control is the goal, keep silica above 3%. If you only need less shine, 1-2% is enough.
| Market | Status | Basis and conditions |
|---|---|---|
| TalcINCI TALC · CAS 14807-96-6 | ||
| EU | Restricted | Annex III / entry 59 — Powdery products for children under 3 must carry "Keep powder away from children's nose and mouth". Asbestos must be absent (Annex II). |
| UK | Restricted | Schedule 3 / entry 59 (retained EU law) — Same wording as the EU entry. |
| US | Permitted | No ingredient-level restriction (FD&C Act) — No federal limit. FDA proposed an asbestos-testing rule in Dec 2024 and withdrew it on 28 Nov 2025; there is no mandatory federal test standard. |
| China | Permitted | IECIC (Inventory of Existing Cosmetic Ingredients) — Asbestos is on the prohibited list; cosmetic-grade talc must be asbestos-free by specification. |
| Japan | Permitted | Not a quasi-drug ingredient; general cosmetic use — No concentration limit for cosmetic use. |
| ASEAN | Permitted | ASEAN Cosmetic Directive, no Annex entry — Asbestos prohibited under ACD Annex II. |
| Korea | Permitted | MFDS cosmetic ingredient standard — No ingredient-level restriction for cosmetic use. |
| Canada | Permitted | Cosmetic Ingredient Hotlist: not listed — Hotlist does not restrict talc. |
| Watch: ECHA RAC recommends Carc. 1B plus STOT RE 1; Article 15 would then ban talc in cosmetics automatically unless the pending derogation succeeds. Expected to be settled in 2027, not yet in force. The UK HSE technical report (Jan 2026) does not propose a CMR classification, so GB requirements are expected to stay as they are. | ||
| Silica (synthetic amorphous)INCI SILICA · CAS 7631-86-9, 112945-52-5 | ||
| EU | Permitted | CosIng listed; no Annex restriction — Synthetic amorphous silica is not the same substance as crystalline silica, which carries a Carc. 1A inhalation classification. Nano forms must be labelled "[nano]" under Article 19(1)(g). |
| UK | Permitted | No Annex restriction |
| US | Permitted | No ingredient-level restriction |
| China | Permitted | IECIC |
| Japan | Permitted | General cosmetic ingredient |
| ASEAN | Permitted | ACD, no Annex entry |
| Korea | Permitted | MFDS cosmetic ingredient standard |
| Canada | Permitted | Hotlist: not listed |
| Watch: None. Keep the distinction between synthetic amorphous silica and crystalline silica explicit — most compliance questions on this material come from that mix-up. | ||
Swipe the table sideways for the full basis column →
Checked November 2026. Summary only — every material in the same format. Not legal advice; verify before labelling.