You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Formulation & Process

Does powder affect lipstick transfer?

It matters, but powder is not the main variable. Transfer is set largely by the film-forming system and the wax ratio, with powder as a secondary adjustment. Being clear about this saves effort, because powder work alone moves the number very little.

Powder influences transfer along three paths. First, absorption: high-absorption powder takes up part of the liquid oil, so the stick firms up and flows less, which reduces what lands on the cup. The effect is real but limited, typically 10-20%. Second, structure: platelet powder builds a network in the bulk, raising structural strength and reducing greasy transfer and pile-up during application. Third, surface: microscopic roughness on the particle affects how the film sits on the lip, and rougher particles adhere better at the cost of glide.

The decisive factors are elsewhere. A film former, such as a volatile silicone or an acrylate copolymer, leaves a layer that does not transfer; the wax system supplies hardness; and the volatile fraction of the oil phase controls set speed. Change those and transfer can fall by more than half. Powder only trims the edges.

Practical powder guidance for low-transfer work: choose a medium-absorption grade at 50-100 g/100 g and dose 5-10%, add 3-5% platelet powder for structure, and avoid very high-absorption silica, which over-hardens the stick and drags during application.

Standardise the test: fixed pressure around 100 g, fixed contact time of ten seconds, fixed lip substrate material. Results from different methods vary several-fold, so cross-supplier numbers are meaningless; compare only your own batches.

One expectation to set: a lipstick that truly does not transfer usually gives up comfort, because the film has to carry everything and users report tightness. Claiming low transfer rather than no transfer is more accurate and reduces complaints.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor