You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Formulation & Process

What powder changes help wear hold up in summer heat?

Three changes happen at once in heat: sebum output rises, oils in the formula soften, and sweat washes across the film. Above 32 C, sebum can run 50-100% higher than at 20 C.

First, raise absorption capacity. Plan for eight hours and assume 1.5-2 times the sebum of room temperature, so capacity needs 30-50% more. A large-pore silica at 4% becomes 5-6%, and add around 2% of a small-pore grade to catch the early surge, because oil appears faster when it is hot.

Second, resist sweat. Choose hydrophobically treated powder, and prefer silicone treatments for stronger water resistance. Add 1-2% film former for overall durability, but pick one that tolerates sweat; some film formers emulsify and turn white when sweat lands.

Third, prevent softening. Low-melting components such as waxes and solid esters soften in heat, so the bulk deforms and the finish slides. Platelet powder raises structural strength on the powder side, while the formula side calls for less solid lipid and higher-melting replacements.

One property that is easy to overlook is structure retention after absorption. Powder that has absorbed oil is softer in heat, and if the particle itself lacks mechanical strength the finish collapses faster. Choose grades that keep their shape once loaded, usually surface-treated with some mechanical integrity.

Change the test conditions. Room-temperature data at 25 C and 50% humidity says nothing about a hot climate. Run eight hours at 35 C and 70-80% humidity in a chamber, or at minimum a combined protocol of four hours static at 35 C plus two hours outdoors.

A field observation worth planning for: complaint rates in the humid pre-monsoon weeks at 30 C and 85% humidity often exceed those of high summer at 35 C and 60%, because sweat evaporates slowly and stays on the skin longer. Test hot and humid, not just hot.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor