You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Formulation & Process

How do I build a water- and sweat-resistant powder system?

Three things have to work together: hydrophobic powder, a water-durable film, and few hydrophilic ingredients. Any one alone is not enough.

First, hydrophobic powder. Silicone-treated grades are the usual choice, and coating uniformity matters more than treatment type. On a poorly coated particle, the bare areas wet locally and the finish develops patchy marks. Ask for coating coverage data from thermogravimetric loss or elemental analysis on incoming lots.

Second, a water-durable film. Acrylate copolymers and silicone resins such as trimethylsiloxysilicate hold up well; some water-soluble film formers simply re-emulsify on contact and give no resistance at all. Dose 2-4%, since more feels suffocating and pills.

Third, cut hydrophilic ingredients. Glycerin, polyols and water-soluble humectants all draw water in and must be limited. If they are needed, put them in the internal phase and keep them separated by the emulsifier system.

A working ratio: hydrophobic porous silica 4-6%, hydrophobic platelet powder 25-35%, silicone resin film former 2-3%, and a low-hydrophilicity moisturising base. This passes the level of a 30-minute immersion in a 40 C water bath without breakdown.

Two tests are worth running. The water droplet test shows whether droplets bead and roll off. The immersion test, 20 minutes in artificial sweat at 37 C, shows how much of the finish survives and is closer to real use, especially for sun care.

Accept the trade-off: the more water-resistant the formula, the harder it is to remove. A strong formula will not come off with a regular cleanser and needs a cleansing oil or a dedicated remover. Without that instruction, users report residue and breakouts. Set the resistance level and the removal route together and say so on the pack.

One more distinction: water resistance is not oil resistance. A water-resistant formula still gives way to sebum, so oily skin will shine after a few hours. Design the two directions separately.

Not the answer you need? Request a sample or talk to our technical team — tell us your formulation system and dosage, and we will recommend the right grade.
Become a Distributor