You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Calcined Kaolin

Global Regulation Compliant

Global regulation compliant grade calcined kaolin, 1 grade, mean particle size 3 µm. Calcination removes structural water and raises the refractive index, improving opacity and matte finish in foundations and pressed powders.

Product NameProduct CodeAverage Particle Size
Kingaolin GL031063293 µm

Calcined kaolin with high whiteness and strong absorption for pressed powder, loose powder and foundation, improving wear and oil control.

Need a sample or technical data for Global Regulation Compliant?

Request sample

Calcined Kaolin — frequently asked questions

The 11 questions formulators and buyers ask most — open a card for the full answer and our reasoning.See all “Calcined Kaolin” answers (11) →

Recommended 01 / 11

What does the 'global regulation compliant' series change?

It is produced and tested against a tighter heavy-metal profile, which is what most market-specific …

Read the full answer
Recommended 02 / 11

Calcined or hydrous kaolin — what is the actual difference in the formula?

Calcination drives off the water of crystallisation and sinters the platelets, which raises whitenes…

Read the full answer
Recommended 03 / 11

Why is calcined kaolin used for press strength?

Because the calcination step creates a harder, more angular particle that interlocks under pressure …

Read the full answer
04 / 11

5000 at 2 µm or GL03 at 3 µm?

2 µm if you want maximum oil absorption and a matte finish;

Read the full answer
05 / 11

How much can I load, and what does it do to skin feel?

5–15% is the usual band.

Read the full answer
06 / 11

Does higher calcined kaolin loading mean better oil control?

Up to a point, then it plateaus and starts to cost you comfort.

Read the full answer
07 / 11

Can calcined kaolin replace part of the talc in a pressed powder?

Yes, and it is one of the easier substitutions — 20–40% of the talc is a reasonable starting point.

Read the full answer
08 / 11

Is the whiteness stable across lots?

The specification holds whiteness within a defined band, but calcined kaolin is a natural-mineral pr…

Read the full answer
09 / 11

How does it disperse, and what equipment do I need?

It wets out slowly but disperses cleanly once wetted — the difficulty is the initial wetting, not the breakdown.

Read the full answer
10 / 11

What is the MOQ and how is it packed?

25 kg per bag as standard, with 500 kg jumbo bags for volume orders.

Read the full answer
11 / 11

My pressed powder crumbles or caps after I added kaolin. What went wrong?

Usually too much kaolin, or too little binder to compensate for it.

Read the full answer

Not the question you had? Talk to our technical team, or browse the knowledge base.

Related questions

These come from other powder families that often appear alongside this product in the same formula.

  • How do I choose between triethoxycaprylylsilane, PDMS and stearic acid treatments?

    Choose based on the continuous phase: water-in-oil, oil-in-water, or anhydrous. Surface treatment exists to make the powder compatible with that phase.

    Triethoxycaprylylsilane suits water-in-oil and anhydrous systems; treated powder becomes lipophilic and hydrophobic with good dispersion and a clean feel, which is why it dominates colour cosmetics. Polydimethylsiloxane treatment leans toward slip and water resistance, useful for transfer-resistant formulas. Stearic acid is inexpensive and lipophilic but has limited heat and shear resistance, so it can desorb during high-temperature processing or high-shear dispersion.

    In practice, check the continuous phase first and the process temperature second. If processing exceeds 80 C, stearic acid treatments are effectively off the table.

  • Which powder should I use for oil control, silica or talc?

    Go with porous silica. Talc is better at slip and as a filler — the two are not in the same league for sebum absorption.

    Porous silica traps sebum inside its interconnected pore network and typically absorbs three to six times more oil than talc by weight, so 2-5% loading already delivers a clear matte effect. Talc works mainly through surface adsorption on its platelets and needs a much higher loading to do the same job, and once loaded it tends to cake and make the finish feel heavy. Where talc still wins is slip and cost, which is why it remains the workhorse filler in mid-priced pressed powders.

    Most formulas in practice use both: porous silica for oil control and soft focus, talc or mica for spreadability and bulking, plus a little boron nitride for slip. If long-wear oil control is the goal, keep silica above 3%. If you only need less shine, 1-2% is enough.

Become a Distributor