You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Cosmetic Pigments

Carbon Black

Product NameProduct CodeCI No. Description
Carbon Black
Kingpigment 980B FDA
112480CI 77266Comply With Global Regulations

Carbon Black

Kingpigment 970B

112481CI 77266

Comply With Safety And Technical Standards For Cosmetics (2015 edition)

Cosmetic-grade colorants with stable color, high purity and a mild profile for lipstick, eyeshadow, blush and other color cosmetics.

Need a sample or technical data for Carbon Black?

Request sample

Cosmetic Pigments — frequently asked questions

The 11 questions formulators and buyers ask most — open a card for the full answer and our reasoning.See all “Cosmetic Pigments” answers (11) →

Recommended 01 / 11

You list two carbon black grades with different compliance statements. What is the difference?

They are the same pigment held to two different market specifications, which is a documentation diff…

Read the full answer
Recommended 02 / 11

How does the CI number work, and why does it matter for my registration?

The CI number is the Colour Index identifier for the colorant itself, independent of who makes it or…

Read the full answer
Recommended 03 / 11

Your iron oxides come in needle, spherical and rhombus shapes. Does shape matter?

It changes packing, coverage and how the pigment disperses — and in a pressed product, it changes th…

Read the full answer
04 / 11

Inorganic pigment or organic lake — how do I decide?

By the shade you need and by the regulatory route you can accept, not by preference.

Read the full answer
05 / 11

Ultramarine is marked as unstable under acidic conditions. How acidic is a problem?

Below roughly pH 5 it starts to decompose, releasing hydrogen sulphide;

Read the full answer
06 / 11

Is carmine permitted everywhere, and what do I need to declare?

It is permitted in most markets but with different conditions, and in some customer specifications i…

Read the full answer
07 / 11

Which lakes can I use in lip products?

Check the market's permitted list by CI number and by product category — that is the only reliable t…

Read the full answer
08 / 11

How do I compare light fastness between two grades?

Test them in your own base under your own conditions — a light fastness rating on a datasheet is a s…

Read the full answer
09 / 11

Why does my shade look weaker after switching to a lake?

Because lakes are dyes on a substrate, so a kilo of lake contains less actual colour than a kilo of pigment.

Read the full answer
10 / 11

What are the MOQ and lead time for pigments?

MOQ is 1 kg for a stock grade and 25 kg for a production quantity;

Read the full answer
11 / 11

My pressed powder looks weak in colour. Is it the pigment or the base?

Usually the base — and you can tell in one test, by pressing the same pigment load in a base with an…

Read the full answer

Not the question you had? Talk to our technical team, or browse the knowledge base.

Related questions

These come from other powder families that often appear alongside this product in the same formula.

  • How do I stop lipstick from sweating in summer?

    Sweating is the bullet structure collapsing at elevated temperature, caused by insufficient binding between the oil phase and the powders. The most direct fix is replacing part of the talc or mica with 5-10% hexagonal boron nitride, which clearly improves heat resistance and structural rigidity.

    Boron nitride works in two ways: the platelets increase mechanical interlocking between particles, forming a more stable network, and its lipophilic surface holds the oil phase on the particle surface so less free oil migrates out on heating.

    If sweating persists, adjust the wax-to-oil ratio: raise high-melting waxes such as carnauba or ozokerite, or add a small amount of fumed silica for thixotropic control. Be careful, since excess wax drags on application and dulls gloss. Run a 7-day test at 45 C before locking the formula.

  • How do I keep coverage when reducing powder loading?

    Heaviness is rarely about total powder loading; it is about insufficient hiding power per unit weight, which forces you to over-dose. Switching to more efficient powders lets you cut total loading while holding coverage.

    Options that work: replace standard TiO2 with a finer, tighter-distribution grade, which can cut the required dose by 20-30% at equal coverage; replace some spherical powder with platy grades such as boron nitride or mica, since overlapping platelets cover more efficiently while reflecting light more softly; and introduce porous powders that soften appearance structurally rather than by opacity.

    One point to watch: when powder loading drops, the oil phase usually needs to drop with it. Otherwise you end up with too little powder and too much oil, which brings stability problems related to oil exudation.

Become a Distributor