| Product Name | Product Code | CI No. | PH Stability Range | Light Stability |
Kingcolor R40 (Red 40) | 119015 | 16035 | 3--11 | ⭐⭐⭐⭐⭐ |
| Kingcolor R33 (Red 33) | 119016 | 17200 | 3--11 | ⭐⭐⭐⭐⭐ |
| Kingcolor Y6 (Yellow 6) | 119017 | 15985 | 3--11 | ⭐⭐⭐⭐ |
| Kingcolor Y5 (Yellow 5) | 119018 | 19140 | 3--11 | ⭐⭐⭐⭐⭐ |
| Kingcolor B1 (Blue1) | 119019 | 42090 | 3--11 | ⭐⭐⭐⭐ |
| Kingcolor B5 (Blue 5) | 119020 | 42051 | 9--12 | ⭐⭐⭐⭐⭐ |
| Kingcolor V2 (Violet 2) | 119021 | 60730 | 3--11 | ⭐⭐⭐⭐⭐ |
Cosmetic-grade colorants with stable color, high purity and a mild profile for lipstick, eyeshadow, blush and other color cosmetics.
Need a sample or technical data for Light Resistant Water Soluble Dyes?
The 11 questions formulators and buyers ask most — open a card for the full answer and our reasoning.See all “Cosmetic Pigments” answers (11) →
Test them in your own base under your own conditions — a light fastness rating on a datasheet is a s…
Read the full answerThe CI number is the Colour Index identifier for the colorant itself, independent of who makes it or…
Read the full answerBy the shade you need and by the regulatory route you can accept, not by preference.
Read the full answerBelow roughly pH 5 it starts to decompose, releasing hydrogen sulphide;
Read the full answerIt changes packing, coverage and how the pigment disperses — and in a pressed product, it changes th…
Read the full answerIt is permitted in most markets but with different conditions, and in some customer specifications i…
Read the full answerThey are the same pigment held to two different market specifications, which is a documentation diff…
Read the full answerCheck the market's permitted list by CI number and by product category — that is the only reliable t…
Read the full answerBecause lakes are dyes on a substrate, so a kilo of lake contains less actual colour than a kilo of pigment.
Read the full answerMOQ is 1 kg for a stock grade and 25 kg for a production quantity;
Read the full answerUsually the base — and you can tell in one test, by pressing the same pigment load in a base with an…
Read the full answerNot the question you had? Talk to our technical team, or browse the knowledge base.
Related questions
These come from other powder families that often appear alongside this product in the same formula.
Sweating is the bullet structure collapsing at elevated temperature, caused by insufficient binding between the oil phase and the powders. The most direct fix is replacing part of the talc or mica with 5-10% hexagonal boron nitride, which clearly improves heat resistance and structural rigidity.
Boron nitride works in two ways: the platelets increase mechanical interlocking between particles, forming a more stable network, and its lipophilic surface holds the oil phase on the particle surface so less free oil migrates out on heating.
If sweating persists, adjust the wax-to-oil ratio: raise high-melting waxes such as carnauba or ozokerite, or add a small amount of fumed silica for thixotropic control. Be careful, since excess wax drags on application and dulls gloss. Run a 7-day test at 45 C before locking the formula.
Heaviness is rarely about total powder loading; it is about insufficient hiding power per unit weight, which forces you to over-dose. Switching to more efficient powders lets you cut total loading while holding coverage.
Options that work: replace standard TiO2 with a finer, tighter-distribution grade, which can cut the required dose by 20-30% at equal coverage; replace some spherical powder with platy grades such as boron nitride or mica, since overlapping platelets cover more efficiently while reflecting light more softly; and introduce porous powders that soften appearance structurally rather than by opacity.
One point to watch: when powder loading drops, the oil phase usually needs to drop with it. Otherwise you end up with too little powder and too much oil, which brings stability problems related to oil exudation.
We reply within one business day with shipping arrangements and technical documents. Samples are free of charge; freight is collect or credited against your next order.