| Product Name | Product Code | Pigment Content | CI No. |
Titanium Dioxide Cosllary PU 852W | 132201 | 15% | CI 77891 |
| Red Iron Oxide Cosllary PU 116R | 132202 | 15% | CI 77491 |
| Yellow Iron Oxide Cosllary PU 340Y | 132203 | 15% | CI 77492 |
Chromium Oxide Green Cosllary PU 410G | 132204 | 15% | CI 77288 |
| Ultramarine Blue Cosllary PU 510BL | 132205 | 15% | CI 77007 |
| Ultramarine Violet Cosllary PU 710V | 132206 | 15% | CI 77007 |
| Carbon Black Cosllary PU 980B FDA | 132207 | 10% | CI 77266 |
Red 5 Cosllary PU 170R | 132208 | 10% | CI 12490 |
| Yellow 1 Cosllary PU 370Y | 132209 | 10% | CI 11680 |
| Blue 15 Cosllary PU 570BL | 132210 | 10% | CI 74160 |
Water-based pigment slurry with stable dispersion and a mild profile for liquid foundation, mascara, eyeliner and water-based makeup.
Need a sample or technical data for Water-based Nail Polish Specialized Pigments Slurry?
The 14 questions formulators and buyers ask most — open a card for the full answer and our reasoning.See all “Water-based Slurry” answers (14) →
They are the same dispersion technology tuned for two applications with unusual demands.
Read the full answerThey are not interchangeable.
Read the full answerIn practice the terms overlap and suppliers use them loosely, so the only reliable approach is to as…
Read the full answerBecause water has a lower viscosity at the same solids and cannot hold a dense pigment load in suspe…
Read the full answerParticle size.
Read the full answerAccept soft settling, prevent hard caking, and mix before use.
Read the full answerFirst, a common assumption to correct: graphene does not give you carbon-black black.
Read the full answerThe slurry is preserved as supplied, but the preservation margin in your finished product is yours to establish.
Read the full answerMOQ is 5 kg for a stock grade and 25 kg for production.
Read the full answerAdd it to the water phase before emulsification, not to the finished emulsion.
Read the full answerTwo different problems look the same from the outside, and they have different fixes.
Read the full answerFineness is set at the milling stage and verified on a grind gauge — a drawdown on a graduated steel…
Read the full answerYes, and it is a growing category, but the compliance route is different from a decorative product.
Read the full answerThe colour drives the regulation, not the carrier — and yellow, red and blue each sit in a different place.
Read the full answerNot the question you had? Talk to our technical team, or browse the knowledge base.
Related questions
These come from other powder families that often appear alongside this product in the same formula.
Pilling in liquid foundation is, in most cases, not a problem with the powder itself — used on its own, powder almost never produces pilling. The usual cause is incompatibility between raw materials: high levels of silicone elastomers, polymeric thickeners and film formers build a relatively thick film on the skin, and that film is mechanically lifted during application and rolls into pills. These materials are more likely to show the effect when they are combined with powders. When designing a formula, consider the compatibility of the system as a whole, and avoid films that are excessively thick or uneven in thickness.
Heaviness is rarely about total powder loading; it is about insufficient hiding power per unit weight, which forces you to over-dose. Switching to more efficient powders lets you cut total loading while holding coverage.
Options that work: replace standard TiO2 with a finer, tighter-distribution grade, which can cut the required dose by 20-30% at equal coverage; replace some spherical powder with platy grades such as boron nitride or mica, since overlapping platelets cover more efficiently while reflecting light more softly; and introduce porous powders that soften appearance structurally rather than by opacity.
One point to watch: when powder loading drops, the oil phase usually needs to drop with it. Otherwise you end up with too little powder and too much oil, which brings stability problems related to oil exudation.
We reply within one business day with shipping arrangements and technical documents. Samples are free of charge; freight is collect or credited against your next order.