You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Wet-Stripped Boron Nitride

Methicone Surface Treatment

Methicone-treated grade wet-milled boron nitride, 5 grades, mean particle size 3–20 µm, specific surface area 2–10. The methicone coating raises hydrophobicity, so the powder disperses more readily in oil and silicone phases and presses with better release and less caking. For foundations, pressed powders and sunscreens.

Product NameProduct CodeAverage Particle SizeSpecific Surface AreaRegulation
Kingbornit 30021105023 µm10Soluble Borate≤0.1%
Kingbornit 5001105016 µm8Soluble Borate≤0.06%
Kingbornit 301211050611 µm3Soluble Borate≤0.06%
Kingbornit 301511051615 µm3Soluble Borate≤0.06%
Kingbornit 302011051720 µm2Soluble Borate≤0.06%

Wet-stripped boron nitride with an ultra-smooth, silky touch and excellent dispersibility for loose powder, pressed powder and eyeshadow.

Need a sample or technical data for Methicone Surface Treatment?

Request sample

Wet-Stripped Boron Nitride — frequently asked questions

The 15 questions formulators and buyers ask most — open a card for the full answer and our reasoning.See all “Wet-Stripped Boron Nitride” answers (15) →

Recommended 01 / 15

Do I need the SI-treated boron nitride, and what does the treatment actually solve?

The untreated powder is already hydrophobic enough for most anhydrous systems, so the treatment is not about wetting.

Read the full answer
Recommended 02 / 15

How do I combine boron nitride with mica and silica?

By function, not by ratio.

Read the full answer
Recommended 03 / 15

How does boron nitride affect coverage and whiteness?

It does not add coverage, and it is not a whitening filler.

Read the full answer
04 / 15

Which Kingbornit series should I use for Europe, the US and Japan?

Start from the market, then pick the particle size.

Read the full answer
05 / 15

How do I choose between the 6, 12, 15 and 20 µm grades?

Choose by the skin feel you are targeting, then check the coverage requirement.

Read the full answer
06 / 15

What loading do you recommend in pressed powder and in loose powder?

A common starting point is 3–8%, adjusted upward for skin feel.

Read the full answer
07 / 15

Can boron nitride replace talc, and at what ratio?

Partly, and not one-for-one.

Read the full answer
08 / 15

What is soluble borate, and why does the grade matter for export?

It is the fraction of boron that can leach out of the powder, and it is what market-specific questio…

Read the full answer
09 / 15

The coarser grades have lower specific surface area. Does that change how they behave?

Yes, and it is the main reason size selection matters more than series selection.

Read the full answer
10 / 15

Does boron nitride work in liquids — foundations, creams, lip products?

Yes, but for a different reason than in powders.

Read the full answer
11 / 15

What comes with each lot, and what can you provide for a REACH or customer questionnaire?

Every lot ships with a COA reporting the specification figures for that batch, including the soluble…

Read the full answer
12 / 15

What is the minimum order and lead time for a standard grade like 7012?

Standard grades are normally stocked and ship in small quantities for sampling;

Read the full answer
13 / 15

Boron nitride or a silicone elastomer powder — which gives better slip?

They give different kinds of slip, and most premium powders end up using both.

Read the full answer
14 / 15

The boron nitride feels gritty in my formula. What is going wrong?

Almost always dispersion, not the grade.

Read the full answer
15 / 15

Can boron nitride do anything useful in a sunscreen?

It is not a UV filter and contributes essentially nothing to SPF.

Read the full answer

Not the question you had? Talk to our technical team, or browse the knowledge base.

Related questions

These come from other powder families that often appear alongside this product in the same formula.

  • How do I choose between triethoxycaprylylsilane, PDMS and stearic acid treatments?

    Choose based on the continuous phase: water-in-oil, oil-in-water, or anhydrous. Surface treatment exists to make the powder compatible with that phase.

    Triethoxycaprylylsilane suits water-in-oil and anhydrous systems; treated powder becomes lipophilic and hydrophobic with good dispersion and a clean feel, which is why it dominates colour cosmetics. Polydimethylsiloxane treatment leans toward slip and water resistance, useful for transfer-resistant formulas. Stearic acid is inexpensive and lipophilic but has limited heat and shear resistance, so it can desorb during high-temperature processing or high-shear dispersion.

    In practice, check the continuous phase first and the process temperature second. If processing exceeds 80 C, stearic acid treatments are effectively off the table.

  • What does boron nitride actually do in cosmetics?

    Hexagonal boron nitride is a multifunctional platy powder: it delivers lubricity, press strength, lustre and thermal conductivity at the same time, which is hard to replicate with a single alternative.

    The platelet structure gives a low friction coefficient, so it feels silky rather than greasy. The platelets interlock during pressing and provide compact strength. Its refractive index and platy habit produce a soft satin lustre rather than the sparkle of mica. Thermal conductivity adds a slight cooling sensation on skin and helps the bulk dissipate heat.

    Typical levels: 3-8% in pressed and loose powders, 5-10% in lipstick, 2-5% in liquid foundation. Above about 10% the lustre becomes pronounced, so use it sparingly in matte formulas.

Become a Distributor