You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Surface Treatment

Triethoxycaprylylsilane Surface Treatment

1. Provides a soft and smooth skin feel.
2. Offers excellent hydrophobicity.
3. Easily disperses in oils and silicones.
4. Low oil absorption enables higher pigment loading in formulations.
5. Suitable for various color cosmetic applications.

 

Boron Nitride

Product NameProduct Code
Kingbornit 3002 AS110602
Kingbornit 500 AS110600

Silica

Product NameProduct Code
Kingsica 3028 AS107143
Kingsica 5028 AS107129

Titanium Dioxide

Product NameProduct Code
Kingruti 0205 AS106533
Kingruti CR50 AS106535

Talc

Product NameProduct Code
Kingtalfer LS-800 AS106145
Kingtalfer LS-1250 AS106140

Sericite

Product NameProduct Code
Kingcovite 51 AS106220

Mica

Product NameProduct Code
Kingcovite 28 AS106218

Synthetic Fluorphlogopite

Product NameProduct Code
Kingcovite 71 AS106266

Kaolin

Product NameProduct Code
Kingaolin 5000 AS106325

Inorganic Pigment

Product NameProduct Code
Kingpigment 116R AS112307
Kingpigment 340Y AS112304
Kingpigment 920B AS112305
Kingpigment 410G AS/
Kingpigment 510BL AS/
Kingpigment 710V AS112461
Kingbismo B012 AS/

Organic Pigment

Product NameProduct Code
Kingpigment 150R AS/
Kingpigment 160R AS112512
Kingpigment 180R AS/
Kingpigment 190R AS112515
Kingpigment 210R AS/
Kingpigment 220R AS112518
Kingpigment 230R AS112519
Kingpigment 271R AS112513
Kingpigment 380Y AS/
Kingpigment 390Y AS112516
Kingpigment 580BL AS/

AS surface treatment is available for the full range of KingPowder powder materials.

Surface treatment technology that improves powder dispersibility, skin feel and formulation compatibility across cosmetic systems.

Need a sample or technical data for Triethoxycaprylylsilane Surface Treatment?

Request sample

Surface Treatment — frequently asked questions

The 13 questions formulators and buyers ask most — open a card for the full answer and our reasoning.See all “Surface Treatment” answers (13) →

Recommended 01 / 13

What is the difference between triethoxycaprylylsilane and dimethicone treatment?

Both make the surface hydrophobic;

Read the full answer
Recommended 02 / 13

When is a surface treatment worth paying for?

When the powder has to survive a system it was not born to live in — a silicone phase, a W/O emulsio…

Read the full answer
Recommended 03 / 13

What loading of treated powder do you see in a W/Si system?

It depends on the powder, but the treated grades are what make high loadings possible in silicone-continuous systems.

Read the full answer
04 / 13

There are eleven treatment types. How do I narrow it down?

By what you are trying to fix — that is what separates them.

Read the full answer
05 / 13

Can the SI treatment be applied to any grade?

Yes — to all series and particle sizes.

Read the full answer
06 / 13

Does a surface treatment change the colour or the coverage?

Very little, and what does change is the dispersion, which can look like a colour change until you know why.

Read the full answer
07 / 13

How do I verify that the treatment is actually there?

Three quick checks, in increasing order of effort.

Read the full answer
08 / 13

Does treating a powder affect its regulatory status?

Yes, in the sense that the treatment agent becomes part of the ingredient declaration and must itself be permitted.

Read the full answer
09 / 13

Do I need to change the loading when I switch to a treated grade?

Usually not — start at the same loading and adjust on the result.

Read the full answer
10 / 13

Is there a treatment for a hydrophilic system?

Yes — the hydrophilic treatment exists for water-based and O/W systems where you want improved dispe…

Read the full answer
11 / 13

What is the MOQ for a treated grade?

25 kg for a stock treated grade;

Read the full answer
12 / 13

What dosage of treatment agent is used, and what happens if it is too low?

Treatments are applied at roughly 1–3% on the weight of the powder, depending on the agent and the s…

Read the full answer
13 / 13

I changed treatment supplier on the same base powder. What has to be re-qualified?

Treat it as a new raw material, not as a purchasing change.

Read the full answer

Not the question you had? Talk to our technical team, or browse the knowledge base.

Related questions

These come from other powder families that often appear alongside this product in the same formula.

  • How do I choose between triethoxycaprylylsilane, PDMS and stearic acid treatments?

    Choose based on the continuous phase: water-in-oil, oil-in-water, or anhydrous. Surface treatment exists to make the powder compatible with that phase.

    Triethoxycaprylylsilane suits water-in-oil and anhydrous systems; treated powder becomes lipophilic and hydrophobic with good dispersion and a clean feel, which is why it dominates colour cosmetics. Polydimethylsiloxane treatment leans toward slip and water resistance, useful for transfer-resistant formulas. Stearic acid is inexpensive and lipophilic but has limited heat and shear resistance, so it can desorb during high-temperature processing or high-shear dispersion.

    In practice, check the continuous phase first and the process temperature second. If processing exceeds 80 C, stearic acid treatments are effectively off the table.

  • Is pilling in liquid foundation a powder problem?

    Pilling in liquid foundation is, in most cases, not a problem with the powder itself — used on its own, powder almost never produces pilling. The usual cause is incompatibility between raw materials: high levels of silicone elastomers, polymeric thickeners and film formers build a relatively thick film on the skin, and that film is mechanically lifted during application and rolls into pills. These materials are more likely to show the effect when they are combined with powders. When designing a formula, consider the compatibility of the system as a whole, and avoid films that are excessively thick or uneven in thickness.

Become a Distributor