1. Chemically bonded surface treatment with excellent shear resistance and a broad operating temperature range.
2. Provides excellent waterproof effect and outstanding dispersion in silicone oils, making it suitable for W/Si systems.
3. Offers excellent anti-agglomeration performance, a strong powdery feel, and superior flowability, making it ideal for pressed powders and loose powders.
4. Suitable for color cosmetics such as pressed powders, eyeshadows, and loose powders.
| Product name | Product Code |
| Kingsica 5028 MS | 107138 |
| Product name | Product Code |
| Kingruti 90 MS | 106549 |
| Product name | Product Code |
| Kingtalfer LS-1250 MS | / |
| Product name | Product Code |
| Kingcovite 51 MS | / |
| Product name | Product Code |
| Kingpigment 116R MS | 107138 |
| Kingpigment 340Y MS | 112325 |
| Kingpigment 920B MS | 112327 |
Surface treatment technology that improves powder dispersibility, skin feel and formulation compatibility across cosmetic systems.
Need a sample or technical data for Methicone Surface Treatment?
The 13 questions formulators and buyers ask most — open a card for the full answer and our reasoning.See all “Surface Treatment” answers (13) →
Yes — to all series and particle sizes.
Read the full answerWhen the powder has to survive a system it was not born to live in — a silicone phase, a W/O emulsio…
Read the full answerIt depends on the powder, but the treated grades are what make high loadings possible in silicone-continuous systems.
Read the full answerBy what you are trying to fix — that is what separates them.
Read the full answerVery little, and what does change is the dispersion, which can look like a colour change until you know why.
Read the full answerBoth make the surface hydrophobic;
Read the full answerThree quick checks, in increasing order of effort.
Read the full answerYes, in the sense that the treatment agent becomes part of the ingredient declaration and must itself be permitted.
Read the full answerUsually not — start at the same loading and adjust on the result.
Read the full answerYes — the hydrophilic treatment exists for water-based and O/W systems where you want improved dispe…
Read the full answer25 kg for a stock treated grade;
Read the full answerTreatments are applied at roughly 1–3% on the weight of the powder, depending on the agent and the s…
Read the full answerTreat it as a new raw material, not as a purchasing change.
Read the full answerNot the question you had? Talk to our technical team, or browse the knowledge base.
Related questions
These come from other powder families that often appear alongside this product in the same formula.
Choose based on the continuous phase: water-in-oil, oil-in-water, or anhydrous. Surface treatment exists to make the powder compatible with that phase.
Triethoxycaprylylsilane suits water-in-oil and anhydrous systems; treated powder becomes lipophilic and hydrophobic with good dispersion and a clean feel, which is why it dominates colour cosmetics. Polydimethylsiloxane treatment leans toward slip and water resistance, useful for transfer-resistant formulas. Stearic acid is inexpensive and lipophilic but has limited heat and shear resistance, so it can desorb during high-temperature processing or high-shear dispersion.
In practice, check the continuous phase first and the process temperature second. If processing exceeds 80 C, stearic acid treatments are effectively off the table.
Pilling in liquid foundation is, in most cases, not a problem with the powder itself — used on its own, powder almost never produces pilling. The usual cause is incompatibility between raw materials: high levels of silicone elastomers, polymeric thickeners and film formers build a relatively thick film on the skin, and that film is mechanically lifted during application and rolls into pills. These materials are more likely to show the effect when they are combined with powders. When designing a formula, consider the compatibility of the system as a whole, and avoid films that are excessively thick or uneven in thickness.
We reply within one business day with shipping arrangements and technical documents. Samples are free of charge; freight is collect or credited against your next order.