You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

Surface Treatment

Isopropyl Titanium Triisostearate Surface Treatment

1. Ultra-low oil absorption increases pigment loading capacity in formulations.

2. Easily disperses in various oils, including highly polar oils.

3. Provides excellent water resistance.

4. Delivers a soft texture and improves pressability.

Titanium Dioxide

Product NameProduct Code
Kingruti 90 TTS106551

Talc

Product Name Product Code
Kingtalfer LS-1250 TTS106174

Sericite

Product NameProduct Code
Kingcovite 51 TTS/

Inorganic Pigment

Product NameProduct Code
Kingpigment 116R TTS112335
Kingpigment 340Y TTS112334
Kingpigment 920B TTS112336
Kingpigment 510BL TTS/
Kingpigment 710V TTS/
Kingpigment 410G TTS/

Organic Pigment

Product Name Product Code
Kingpigment    150R TTS/
Kingpigment    160R TTS/
Kingpigment    180R TTS/
Kingpigment    190R TTS112511
Kingpigment    210R TTS/
Kingpigment    220R TTS/
Kingpigment    230R TTS/
Kingpigment    271R TTS/
Kingpigment    380Y TTS/
Kingpigment    390Y TTS/
Kingpigment    580BL TTS/

Isopropyl Titanium Triisostearate surface-treated products are available across different product series and particle sizes.

Surface treatment technology that improves powder dispersibility, skin feel and formulation compatibility across cosmetic systems.

Need a sample or technical data for Isopropyl Titanium Triisostearate Surface Treatment?

Request sample

Surface Treatment — frequently asked questions

The 13 questions formulators and buyers ask most — open a card for the full answer and our reasoning.See all “Surface Treatment” answers (13) →

Recommended 01 / 13

There are eleven treatment types. How do I narrow it down?

By what you are trying to fix — that is what separates them.

Read the full answer
Recommended 02 / 13

When is a surface treatment worth paying for?

When the powder has to survive a system it was not born to live in — a silicone phase, a W/O emulsio…

Read the full answer
Recommended 03 / 13

What loading of treated powder do you see in a W/Si system?

It depends on the powder, but the treated grades are what make high loadings possible in silicone-continuous systems.

Read the full answer
04 / 13

Can the SI treatment be applied to any grade?

Yes — to all series and particle sizes.

Read the full answer
05 / 13

Does a surface treatment change the colour or the coverage?

Very little, and what does change is the dispersion, which can look like a colour change until you know why.

Read the full answer
06 / 13

What is the difference between triethoxycaprylylsilane and dimethicone treatment?

Both make the surface hydrophobic;

Read the full answer
07 / 13

How do I verify that the treatment is actually there?

Three quick checks, in increasing order of effort.

Read the full answer
08 / 13

Does treating a powder affect its regulatory status?

Yes, in the sense that the treatment agent becomes part of the ingredient declaration and must itself be permitted.

Read the full answer
09 / 13

Do I need to change the loading when I switch to a treated grade?

Usually not — start at the same loading and adjust on the result.

Read the full answer
10 / 13

Is there a treatment for a hydrophilic system?

Yes — the hydrophilic treatment exists for water-based and O/W systems where you want improved dispe…

Read the full answer
11 / 13

What is the MOQ for a treated grade?

25 kg for a stock treated grade;

Read the full answer
12 / 13

What dosage of treatment agent is used, and what happens if it is too low?

Treatments are applied at roughly 1–3% on the weight of the powder, depending on the agent and the s…

Read the full answer
13 / 13

I changed treatment supplier on the same base powder. What has to be re-qualified?

Treat it as a new raw material, not as a purchasing change.

Read the full answer

Not the question you had? Talk to our technical team, or browse the knowledge base.

Related questions

These come from other powder families that often appear alongside this product in the same formula.

  • How do I choose between triethoxycaprylylsilane, PDMS and stearic acid treatments?

    Choose based on the continuous phase: water-in-oil, oil-in-water, or anhydrous. Surface treatment exists to make the powder compatible with that phase.

    Triethoxycaprylylsilane suits water-in-oil and anhydrous systems; treated powder becomes lipophilic and hydrophobic with good dispersion and a clean feel, which is why it dominates colour cosmetics. Polydimethylsiloxane treatment leans toward slip and water resistance, useful for transfer-resistant formulas. Stearic acid is inexpensive and lipophilic but has limited heat and shear resistance, so it can desorb during high-temperature processing or high-shear dispersion.

    In practice, check the continuous phase first and the process temperature second. If processing exceeds 80 C, stearic acid treatments are effectively off the table.

  • Is pilling in liquid foundation a powder problem?

    Pilling in liquid foundation is, in most cases, not a problem with the powder itself — used on its own, powder almost never produces pilling. The usual cause is incompatibility between raw materials: high levels of silicone elastomers, polymeric thickeners and film formers build a relatively thick film on the skin, and that film is mechanically lifted during application and rolls into pills. These materials are more likely to show the effect when they are combined with powders. When designing a formula, consider the compatibility of the system as a whole, and avoid films that are excessively thick or uneven in thickness.

Become a Distributor